EZ card controller control card for laser marking

EZ card controller control card for laser marking

Product Name: Lospeed marking card  


Product Summary

Galvanometer control signal to a digital signal can be directly connected to a common international digital galvanometer 


Product Description

• galvanometer control signal to a digital signal can be directly connected to a common international digital galvanometer. 

• Flight Marking: rotary encoder can be connected, real-time detection assembly line speed, to ensure high-speed marking effect. 

•  Smarking control card parallel operation. 8 sets of control cards can be processed in different content. 

• Expansion axis (stepper motor servo motor) Output: output two channels Direction / pulse signal to control the stepper motor (or servo motor), can be used for shaft or stitching. 

• 12 general-purpose input digital signal (TTL compatible). 

• 13 general-purpose digital signal output (TTL compatible). 

• ReMark (cached Duplicate marking) signal: the same as used for marking content, require high-speed marking situation. ReMark foot switch can be connected to the signal can also be connected to a common input signal. If the content contains a variable text marking, or marking more content can not all be saved in the board, you must connect to a common input signal. 

• Laser can be set to active high signal can also be set to active low. 

• PWM signal provides check points drive. 

• Two analog control output power / frequency. 

• Compatible with USB 2.0